Industrial coatings 6

The clean concrete protective finish is made of imported silicone emulsion, pigment, auxiliary agent and deionized water. It is a special protective material for fair faced concrete. General concrete protection process relies on transparent coating or hydrophobic protection agent, but the transparent style protection material is easy to appear damp mark on concrete surface, and damage the style of concrete pouring itself. “ Bao &rdquo concrete; concrete protective topcoat is dedicated to the development of the concrete protective coating, the film will not be wet traces, also has protective effect and excellent decorative effect, prolong the service life of concrete. After the construction of the material with the supporting materials, it can give full play to the characteristics of waterproof, breathable and good durability, and effectively prevent the destruction of the fair faced concrete by ultraviolet light, acid rain, ice and snow. By adding nano transparent pigment, &ldquo, precious concrete &rdquo, clean concrete protective coating can be produced after the construction of color transparent elegant effect, so that the decorative greatly improved. Product characteristics: * super durability Using acrylic resin material with excellent properties for water paint, the product has excellent durability and can effectively resist the damage of ultraviolet ray to material. * respiratory The use of silicone hydrophobic breathable features, the paint film prepared with “ respiratory ”, which can effectively prevent external rain inside the internal water vapor can easily escape, avoid the damage of concrete. *

Industrial coatings 1

Solventless epoxy self leveling floor paint is made of advanced epoxy resin and aliphatic curing agent, with inorganic wear resistant aggregate, special additives made of wear-resistant, shock resistant, self leveling floor coating. Two, product features and applications: Low viscosity, good leveling. It can form a variety of coating thickness at one time. No interface, one-time construction, excellent operation. High film strength and excellent adhesion. Gloss excellent. Ground use of general buildings such as schools, hospitals, offices, computer rooms, etc.. GMP pharmaceutical, electronics, food processing plants, shopping malls, paper mills and other internal ground use. Three, construction of (1) coating,

Industrial coatings 2

 : This product adopts advanced crystal non staining technology, effectively prevent dirt penetration, has the characteristics of super easy to scrub, common stains easily erase, clean wall instant restore. This film is exquisite and smooth, good adhesion, antibacterial, unique innovation odor technology, make the products smell fresh and make Home Furnishing environment more environmental health products such as gold, like life, and happiness everywhere. Construction method: roller / brush / airless Dilution: use before mixing evenly, in order to achieve the best brushing effect, roll coating, brushing can be used in accordance with the actual situation, not more than 25% (volume ratio) dilution of water (according to the construction feel, as appropriate, change or increase). If using airless spraying, according to the actual situation, the use of no more than 10% (volume ratio) dilution of water. Drying time: 7 days /25 DEG C, low temperature (not lower than 5 degrees), extended to achieve ideal paint film effect. Cleaning tools: after painting, stopping and painting, please use clean water to clean all the appliances in time. Construction temperature: please do not work in cold or humid weather (temperature below 5 degrees, relative humidity is greater than 85%), otherwise it can not achieve the desired coating effect. Theoretical consumption: 10-12 m2 / liter / single pass (dry film 30 microns). Because of the roughness of construction surface and dilution ratio, the paint consumption is different. Recoating time: (dry film 30 micron, 25 DEG -30 DEG

Industrial coatings 3

Alkyd deck paint is made of alkyd resin as base material and added inorganic pigment. After grinding, it is mixed with proper amount of drying agent and organic solvent. The main characteristics of Excellent adhesion. Excellent water resistance and wear resistance. Recommended uses Suitable for coating ships, steel, and wooden surfaces on decks. The reference index The film the color and appearance of                         accords with standard, smooth, and in the color range of The viscosity of S / (TU -4 cup)                                   ≥ 60The fineness of /μ m                                                            & nbsp;   ≤ 40Drying time (25± 1 degrees, relative humidity of 65± 5%):

Industrial coatings 4

Industrial coatings 4

Industrial coatings 5

Industrial coatings 5

Industrial coatings 7

Industrial coatings 7

Industrial coatings 8

Industrial coatings 8