Coating products 6

Nano modified exterior wall paint
    coating components: water acrylic emulsion, pigments, additives, nano materials.

      product features: specially designed for the surface of solid wood, concrete and stone base material, has good toughness of closed water priming, of wood, concrete and stone have excellent adhesion to solid substrate, high strength, good water resistance, good air permeability. Guaranteed the best performance of coating system.

      drying time: touch dry for 30 minutes, re coating time 2-4 hours. (this data was obtained at 25 degrees C and 50% relative humidity conditions):       construction methods: roll coating, brushing or spraying can be required to be enough to ensure that the primer can completely smooth cover the base material.

      construction process: 1, new concrete wall must be solidified before construction. 2, surface pretreatment: the material surface should be clean, no dust, grease, surface material; soft skin to get rid of the scraper, sandpaper to smooth surface, such as holes and cracks, please use the appropriate filling agent filled, and then gently polished to a smooth surface. 3. Deal with the coated surface: thoroughly polish the surface, remove the loose, off and powder film. The glossy surface should be sanded off before applying the paint. 4 dilution: smooth concrete surface or more hot construction conditions, can add up to 5% water dilution.

      dosage: according to different surface conditions and the general average of 10 square meters of construction over /L.

            installed: 20L/ barrel, 5L/ barrel

      keep       storage: cool and dry place can be stored for 18 months.

      note: before use, first drop primer evenly. In order to protect our environment, please do not put the remaining paint into the drainage ditch. The excess paint should be sealed in a container and treated with special waste collection and processing equipment. In the construction and drying device to maintain good ventilation environment and do not more than 5 DEG C at temperatures above 37 DEG C or higher than 85 DEG relative humidity under the condition of the use of this product, please avoid water vapor in products; products will be stored in the reach of children to avoid long time; skin contact with paint. If splash into eyes, rinse with water for at least 15 minutes. If swallowed, drink plenty of water immediately or go to a hospital.